Blog

Lexmark MB2236adwe Setup Manual

The Lexmark MB2236ADWE is a monochrome laser printer that copy, scan, print, and fax. Moreover, the supporting operating systems are Mac, Linux, and Windows, and the connectivity can be wireless and Ethernet. The maximum duty cycle per month is up to 30,000 pages, and the recommended page volume can be 250 to 2500 pages. The print speed of the Lexmark MB2236ADWE printer is 36 ppm for black and can make color scanning.

This blog can discuss Lexmark MB2236adwe setup, Lexmark MB2236adwe driver, Lexmark MB2236adwe scan to email, etc.

What Is Included With The Lexmark Printer Package?

  • Imaging unit
  • Setup poster
  • CR ROM for software installation
  • Statement of warranty
  • Power cable
  • Safety booklet
  • Toner cartridge
  • Lexmark MB2236ADWE multifunction laser printer

Setting Up My Lexmark MB2236adwe Printer For The First Time

The following guidelines can help you to unpack and set up the Lexmark MB2236adwe printer:

  • First of all, you must cut the tape that is stuck to the printer package.
  • After that, take out the printer from the package by flipping its flaps.
  • Secondly, check for the essential contents that must come along the Lexmark printer.
  • Now, you must clear off all the packing materials like the over protective cover, cardboard placed for safety, etc.
  • And make sure that you send them for recycling.
  • Thirdly, you must power off the Lexmark printer.
  • And do this by attaching one end of the cable to the rear of the printer and the next to the power outlet.
  • Moreover, now long press the power button and power on the Lexmark printer.
  • On the other hand, unpack the toner cartridges and insert them gently on to the respective slots.
  • Further, dust a pile of papers and insert them into the paper input tray and extend the paper output tray.
  • Finally, the Lexmark printer will align the toners and prints the alignment page.
  • And this shall complete the first part of the Lexmark MB2236adwe setup.

Linking My Lexmark MB2236adwe Printer To The Wireless Network

Lexmark MB2236adwe Setup
Lexmark MB2236adwe Setup

The following instructions can guide you to link the Lexmark MB2236adwe printer to the Wireless network:

Using the Lexmark control panel:

  • At first, on the printer home screen, go to Settings and choose Network or ports. And then you must select the Wireless option.
  • Choose Setup on Lexmark printer panel, and then carry on with the guidelines on the LCD.
  • And this shall connect the LexmarkMB2236adwe to the wireless network.

Lexmark Mobile Assistant:

  • Based on the mobile device, install the Lexmark Mobile Assistant app from the
  • Google PlayTM Store or App Store online store.
  • And then, on the Lexmark control panel, go to Settings and choose Network or ports.
  • After that, select Wireless and then Setup Using Mobile App.
  • Now, proceed for Printer ID.
  • Or else press to move through the settings.
  • Moreover, on your mobile device, open the app and agree to the Terms of Use.
  • Enable access to start with the procedure.
  • Further, touch Start WiFi Setup, and then choose your printer.
  • On the other hand, choose a WiFi network, and then key in your credentials.
  • Finally, touch the Finish WiFi Setup option.
  • And this can complete the Lexmark MB2236adwe setup.

Linking My Lexmark Printer to the Network Using the WPS Setup

Before you you could start with the process check for the below:

  • The access point must be WPS certified or WPS compatible.
  • A wireless network cord installed in your Lexmark printer.

Push Button method

  • At first, on the Lexmark printer control panel, choose Settings.
  • And then select Network and Ports -> Wireless.
  • Moreover, you must choose the WiFi Protected Setup.
  • And begin the Push Button Method.
  • Finally, carry on with the prompts on the Lexmark Printer screen.

The private identification number PIN method

  • First of all, on the printer, the control panel, navigate to Settings.
  • Then choose Network or ports and select Wireless.
  • Secondly, choose WiFi Protected Setup and then Start PIN Method.
  • For non-touch-screen printer models, navigate via the settings.
  • And note the eight digit WPS PIN.
  • Thirdly, access a Web browser, and then input the IP ID of the access point in the URL field.
  • Moreover, reach the WPS settings.
  • Finally, input the eight digit PIN and then store the modifications.

Starting With The Lexmark MB2236adwe Scan To Email Settings

Make use of the guidelines below to start with Lexmark MB2236adwe scan to email setting:

  • Firstly, launch a web browser and input the Lexmark printer IP ID in the URL field.
  • After that, click Settings and choose email and Email Setup.
  • Next, you must proceed to configure the Lexmark printer settings.
  • Finally, once done with the changes, you must apply the changes.

How To Configuring Email Settings?

Use the guidelines below to configure the email settings:

  • At first, enter the IP address of the Lexmark printer by opening a Web browser.
  • Secondly, tap Settings and choose E-mail.
  • Thirdly, you must provide the required details that are asked for.
  • And finally, make sure to apply the modifications made.

How To Create An Email Shortcut?

Carry on with the prompts below to create an email shortcut:

  • Launch a web browser and key in the printer IP ID of the printer into the address box.
  • After that, tap Shortcuts and then choose the Add Shortcut option.
  • Under the Shortcut Type menu, choose Email, and configure the settings.
  • Lastly, you must apply the changes that are made.

How To Send An Email Using A Shortcut Number?

The following instructions can enable you to send an email using a short cut number:

  • First of all, you must place the original document into the ADF tray or on the scanner glass.
  • Secondly, on the Lexmark printer control panel, go to Shortcuts and choose Email.
  • For no touch-screen Lexmark printer models, navigate via the settings.
  • Make sure to choose the shortcut number.
  • And finally, send the email.
  • Moreover, this shall complete the Lexmark MB2236adwe scan to email.

How To Download The Driver For My Lexmark MB2236adwe Printer?

Using the prompts below, you can download and install the driver for the Lexmark MB2236adwe printer:

  • At first, you must access a web browser and reach the Lexmark support site to get the Lexmark MB2236adwe driver. 
  • Now, enter the model number of the Lexmark printer in to the search bar and click Go.
  • On the next page, you must choose the drivers and downloads sections.
  • After that, check for your model and the driver file.
  • Secondly, you must choose the operating system that you are using.
  • Next, access the system settings and verify the version of the operating system.
  • Go back to the support site and select the version of the operating system.
  • Moreover, you must click the Download button.
  • And then select a destination to save the driver file.
  • Finally, you must access the driver file location, run the installer.
  • Further, proceed with the prompts to install the driver file.

Lexmark MB2236adwe Printer Troubleshooting

The Lexmark printer is not responding

  • At first, verify if the power cable is linked to the power supply.
  • After that, check if the power outlet is power off by the switch.
  • Secondly, verify if the Lexmark printer is on and not in sleep mode.
  • Thirdly, check whether you have installed the right printer driver.
  • If not, uninstall the old printer and install the new driver from the Lexmark printer site.
  • Thirdly, turn off the Lexmark printer for some time and disconnect it from the power supply.
  • And then check whether the issue persists.

How To Print From A Mobile Device Using The AirPrint Via Lexmark MB2236adwe Printer?

Follow the guidelines to print from a Mobile device using the AirPrint via Lexmark MB2236adwe printer:

  • At first, this app supports only some of the iOS devices.
  • This APP supports only in some Lexmark printer models.
  • Secondly, from the home screen of your mobile device, open a compatible app.
  • Moreover, you must choose an item to print, and then touch the share icon.
  • After that, touch Print option, and then choose your printer.
  • Finally, start with Printing the document.

To Print From Computer:

  • At first, you must open a document on your computer.
  • And then, go to the Menu and select Print.
  • Secondly, you must modify the settings on your computer.
  • Choose your settings from the properties and start to print.
  • Finally, you can click the Printer to start with the printing process.

If you want to get further details about Lexmark MB2236adwe setup and Lexmark MB2236adwe scan to email, then contact us @ +1-844-898-6210 or All printer setup.