Brother HL-L2340DW Setup and Installation

Brother HL-L2340DW is a compact and reliable printer that you can use for a small office or home purposes. Its super-speed duplex printing technology saves you money and time, Enable the ‘Toner save mode’ to initiate additional savings. Furthermore, its manual feed-slot and rear paper exit offer a straight-through paper path to ensure a crisp output! Brother HL-L2340DW setup is a simple process which you can complete without any difficulty. Ensure that you follow all the setup steps without skipping any of them.

Setting up the Equipment

You can complete the following hardware setup steps of the Brother HL-L2340DW printer effortlessly

Brother HL-L2340DW Setup
Brother HL-L2340DW Setup

Initial Setup

  • Start your setup process by unboxing the Brother HL-L2340DW printer and removing it from the box. First, take all components including the manuals and the CD ROM from the box
  • Along with them, remove the starter toner cartridge for installation as well. Now pull the Brother HL-L2340DW printer gently out of the box
  • Take away all the packing foams and the plastic bag and set them aside. Thereafter, insert the toner cartridge into the drum unit and push it firmly until it locks in its place
  • Make sure that you don’t touch the red parts because it may affect your print quality. After that, install the drum unit back into the Brother HL-L2340DW carefully and close the front cover

Paper Loading

  • Now pull the paper tray out of your Brother printer take a stack of paper
  • Following this, fan the stack of paper and load it into the paper tray and adjust the paper guides
  • Always ensure that the paper is flat on the paper tray and below the maximum mark
  • Subsequently, push the paper tray completely into the Brother HL-L2340DW printer lift the paper support flap
  • Now connect the power cord of the Brother HL-L2340DW printer to an electrical socket
  • Finally, turn your Brother HL-L2340DW on by pressing the power button

Wireless Configuration

Make sure you have the following things before beginning the wireless setup process

  1. SSID network name
  2. WPA or WEP network key or passphrase
  3. Working wireless network
  4. A computer or laptop connected to the wireless network you wish to connect your Brother HL-L2340DW printer to

Control Panel Setup

You are just a few more steps away from printing using your Brother HL-L2340DW printer

  • Using the arrow keys on the control panel move up or down to select the ‘Network’ option and press ‘OK’
  • Following this, select the ‘WLAN’ option using the arrow buttons and press ‘OK’
  • Thereafter, select the ‘Setup Wizard’ option and press the ‘OK’ again
  • Now, press ‘Yes’ at the popup that appears
  • Your Brother HL-L2340DW printer will scan for available wireless networks
  • After that, select your SSID network from the list of networks on the control panel screen using the arrow buttons and press ‘OK’
  • Subsequently, enter the WEP or WPA network key and connect your Brother printer to your wireless network

WPS Push Button Setup

Alternatively, you can connect your Brother HL-L2340DW printer to your wireless network by using the push button mode. Make sure that your router supports the WPS push button mode before proceeding further. Push the WPS or AOSS button on your wireless router and then immediately, push the Wi-Fi button on your Brother printer. The Brother HL-L2340DW printer will pair up with your SSID network

Software Installation

  • After finishing the wireless setup, navigate to the downloads page on
  • Now search for your printer model and download the ‘Full Driver & Software’ package on your computer
  • Finally, complete the installation by following the easy on-screen instructions

If you have any more questions about Brother HL-L2340DW setup, feel free to contact our customer service @ +1-844-898-6210 or visit printer setup site.